LaMotte 2020 ClearTrace Series, Руководство пользователя

Страница: 7 / 36

1.2. Intended use
The LaMotte 2020 ClearTrace Inline Turbidity System is used for
continuous monitoring of low-range turbidity in drinking water
applications. The system also measures water temperature.
Data is reported through a local display and a scalable 4-20 milliamp
current output.
Any other use, or use not mentioned here, that is incompatible with the
technical specifications is deemed inappropriate. The operator is solely
responsible for any damage arising from such use.
Other prerequisites for appropriate use include:
•
Observing the instructions, notes and requirements set out in this
instruction manual.
•
Observing all local safety regulations.
•
Observing all warnings and cautions in the documentation regarding
all products used in this measurement system, including the sensor,
mounting hardware, AV38 electronics and cabling.
•
Observing the prescribed environmental and operational conditions.
•
Observing chemical compatibility with all wetted materials.
1.3. Safety Instructions
The Turbidity System should be installed and operated
only by personnel familiar with the sensor and qualified for
such work.
A defective Turbidity System should be returned to
LaMotte for repair or replacement. Contact LaMotte to
obtain a Return Material Authorization (RMA) number.
No modifications to the Turbidity System are allowed. The
manufacturer/supplier accepts no responsibility for damage
caused by unauthorized modifications. The risk is borne
entirely by the user.
1.4. Removal from Service / Correct Disposal of the
Turbidity System
Removal from Service
•
Disconnect the cable wiring from the controller terminal block.
•
Remove the Turbidity System from the mounting hardware.
Correct Disposal of Unit
•
When the Turbidity System is taken out of service, observe the local
environmental regulations for correct disposal.
6