STEP #3
ATTACH STRAIGHT RAILS
LAMONT HOME
Bassinet Assembly Instructions
1) The bassinet body is upside down.
2) Attention! Please follow the details of this step very closely.
3) Pick up the straight rail and align the teardrop shaped end with the leg
socket.
The top of the straight rail should be flat like the letter “T”.
If it is not, turn the rail end to end and align the teardrop shaped end on
the straight rail with the leg socket. Be sure to attach rails correctly.
4) Insert the teardrop shaped end of the straight rail into the leg socket, insert
3/4 inch screw through the leg and straight rail, place a nut onto screw
and tighten until snug.
5) Repeat the screw and nut process to the other side of the straight rail.
6) Repeat entire process with the 2nd straight rail.
7) Check to confirm all screws and nuts are snug tight.
page 9
800-553-5621 • www.lamontlimited.com
leg socket
teardrop
shaped end
flat side up
Shown actual size
