STEP #2
ATTACH LEGS TO BASSINET BODY
LAMONT HOME
Bassinet Assembly Instructions
1) Turn bassinet body upside down.
2) Pick up and position the leg with the two oval leg sockets facing the center
of the bassinet body.
3) Push hole tabs on the leg over the hole tab on the bassinet body bottom.
4) Place 1-1/4 inch screw through the hole tabs of the leg and the bassinet
bottom. Place a nut onto the screw and tighten until snug.
5) Repeat the screw and nut process to the other side of the leg.
6) Repeat the entire process with the 2nd leg.
7) Check to confirm all screws and nuts are snug tight.
800-553-5621 • www.lamontlimited.com
page 8
Shown actual size
