
STEP #10
RIBBON BELT AND BOW INSTALLATION
(May be required on some models)
1) Identify the ribbon belt and bow you would like to use from the liner set.
2) Belt loops are located around the top edge of the bassinet body. Find the
belt loop opposite the canopy end and start the ribbon through the loop.
3) Pull the ribbon through the remaining belt loops around the top of the
bassinet body.
I
t is very important not to miss any loops.
4) Attach the two ends of the ribbon to each other by using the hook and loop
fastener on each end of the ribbon, as shown in 1st drawing.
5) Attach the bow to the belt loop at the hook and loop fastener end where
you started and stopped threading the ribbon, as shown in 2nd drawing.
LAMONT HOME
Bassinet Assembly Instructions
800-553-5621 • www.lamontlimited.com
page 16