www.howdens.com
Page _ 7
LAMONA
Appliances
•
Do not heat closed tins and
glass jars in the oven. The
pressure that would build-up in
the tin/jar may cause it to
burst.
•
Do not place any materials
close to the product as the
sides may become hot during
use.
•
WARNING FIRE RISK -
Do not place aluminium foil,
baking trays or cook on the
base of this oven, doing so will
cause permanent damage to
your appliance and cabinetry
with the potential risk of fire.
•
Parts of the oven may
become hot during or immedi-
ately after use. Care should be
taken to avoid touching the
heating elements, and compo-
nents inside the oven which
maybe hot. Always allow oven
to cool.
•
If the door seal is very dirty
this can prevent the door from
closing properly during use,
resulting in possible damage to
adjacent furniture and poor
efficiency. Always ensure the
door seal is clean.
•
Product may become hot
when it is in use. Please be
careful not to touch these hot
surfaces.
•
Always use heat resistant
oven gloves when putting
dishes in or removing dishes
from the hot oven.
•
Do not use the product if
any door glass is removed or
damaged.
•
Rear surface of the oven
may get hot when it is in use.
Make sure that the electrical
connections do not contact the
rear surface; otherwise, con-
nections may be damaged.
•
Do not trap the mains cable
and do not route it over hot
surfaces. The cable insulation
may melt and cause a short
circuit.
•
Product must be installed
by a qualified person in accord-
ance with the regulations in
force. Otherwise, the guarantee
may become void.
•
When hot and cold air
meet, condensation can form.
The outer door is air cooled and
the inner glass will become hot
during cooking, therefore some
condensation might form. This
is perfectly normal. All conden-
sation will disappear as the
oven reaches cooking tempera-
ture.
Содержание LAM3601
Страница 2: ......
Страница 3: ...See back page for product serial number...
Страница 31: ......
Страница 32: ...Product serial number Place sticker here ISSUE v8 250117 285 4453 99 R AA 25 01 2017...