Lamona LAM3601, Инструкции и установка

Страница: 23 / 32

Exclusive to Howdens Joinery.co
User manual LAM3601
Page_ 22
The inner glass panels of the door can be removed
for cleaning.
When cleaning, avoid the use any harsh
abrasive chemicals or sharp metal scrapers as this
could scratch the surface and damage the glass.
Please be aware when removing and
cleaning the glass that the door has the potiential
to spring closed.
We recommend you support the door at all times or
remove the entire door assembly prior to attempting
to clean it.
In order to do this:
1. Open the door fully.
2. The top plastic cap can be pulled away from the
retaining clips.
4. To replace the glass follow this process in reverse
ensuring the printed surface of the glass is facing
downwards.
Ensure the glass is fully located in the lower
retaining slots before attempting to re-fit the top cap.
Hot surfaces may cause burns
Make sure that the appliance is switched off and
cooled down in order to avoid the risk of an electric
shock or burns.
The oven lamp is a special lamp that can
resist up to 300ºC. (See technical specifications)
1. Disconnect the oven from the mains.
2. Turn glass outer cover counter clockwise to
remove.
3. Remove oven lamp by turning counter
clockwise. (Dispose of carefully).
4. Replace with new lamp.
5. Replace glass outer cover.
Removing the Inner Door Glass
Replacing the Oven Lamp
1. Remove the front section of the side rack by
pulling it in the oppsite direction of the side wall.
To clean the side wall
2. Remove the side rack completely by pulling it
towards you.
3. The upper glass can be slid out of its
retaining slots and the inner glass can
be removed.