Page _ 19
TROUBLESHOOTING GUIDE
Symptoms
Possible Cause
Solutions
Poor extractor
performance
Smells linger
Product does not
operate
Lamp does not operate
• Mains fuse or breaker has tripped.
• Defective lamp module.
• Clogged
filters.
• Vent ducting; too long, too small
diameter, too many bends.
• Extractor mounted to high above
the hob.
• Call service line.
• Wash grease filters.
• Clogged filters.
• Wash grease filters.
• Change carbon filters (if applicable).
• Change carbon filters (if applicable).
• Check
installation.
• Check extractor for any obvious issues.
• Replace fuse / reset breaker.
•
If you cannot eliminate the problem after following the instructions in this section, consult your depot or the
Service line.
Troubleshooting
Technical Specification
TECHNICAL INFORMATION
Dimensions:
Total Wattage:
113W
Voltage:
220V - 240V 50HZ
Width :
900mm
600mm
Depth :
Your Cooker Hood is
with:
Single motor 105W
Push button control
3 Speed extraction
x4 LED lamps
x2 Aluminium grease filters
Optional Extras:
Charcoal
:
LAM2002 (PK1)
Ducting kits :
APL 2805/6