background image

www.howdens.com

Page _ 6

LAMONA 

Appliances

Before cleaning or attempting any type of maintenance, always make sure that the electricity 

CAUTION: Accessible parts may become hot when used with cooking appliances.

supply is disconnected.

The manufacturer declines all liability in cases where the instructions for the appropriate installation, 

maintenance and use of the extractor hood are not observed.

If the power cable is cut or damaged in any way, disconnect the extractor from the electricity supply and call 

the service number on the rear cover of this booklet or a suitably 

 repairer.

General cleaning        

  

 

 

                                      

Wipe the external surfaces of the appliance regularly using warm water and a mild detergent. NEVER use 

abrasive cleaners, or strong household cleaners as they may affect the appearance of the product and /or

artwork on the control panel, voiding the manufacturers warranty.

Care and Maintenance  

             

The grease filters       

    

The grease 

The grease filters should be cleaned every two  

months or sooner depending on the type of cooking

being performed.

 is of a metallic material and should 

be washed regularly using a neutral detergent,

it can be cleaned in a dishwasher. 

Grease filters should be washed separately to

crockery and kitchen utensils.

Grease filters should be thoroughly

dried before reinstalling on the

extractor. 

1 Push latch to remove 

Installation is the reverse of the

removal process. 

2 Lower 

2

1

Содержание LAM2703

















Отзывы: