Exclusive to Howdens Joinery.co
Page _ 12
User Manual LAM2504
Decorative Chimney Fitting
1. Connect the extractor to the electricity supply (see electrical connections page). We recommend an
isolation switch that is accessible after installation.
2. The outlet reducer maybe required depending on your ducting kit (supplied separately).
3. Fit the appropriate ducting kit if venting externally.
4. Rest the chimney sections on the main extractor body and extend the upper section to the ceiling
5. Use the extended chimney sections to mark-up the appropriate position of the bracket
6. Remove the chimney sections, drill and secure upper fixing bracket with appropriate fixings.
7. Resit the chimney sections on to the extractor body, hooking the lower section on to brasket and
secure to the wall using the screws provided
3.
2.
1.
4.
Note: Remember not to fix the screw too
tightly, so that later height adjustment can
be done more easily.
