Exclusive to Howdens Joinery.co
Page _ 10
User manual LAM2301
Replacing the Lamps
The extractor hood is
with
lamps that may need to be replaced periodically.
•
To do this, ensure that the power is switched off and the lamps have had time to cool.
•
Apply
pressure to the underside of the lamp that needs to be replaced, and twist anticlockwise
(from below) to release.
•
Insert the new 40W type GU10. lamp and twist clockwise (from below) to engage the bayonet pins.
•
If
again, check the fuse and then if necessary call the service line.
the light still does not work, make sure that the new lamp is in good condition, try fitting the lamp
Lamp replacement is not covered by your guarantee
The lamps on this appliance should only be used during operation of the cooker hood. They should not
be left on permanently and used as a main lighting source. The extractor is for domestic use only.
