www.howdens.com
Page _ 19
TROUBLESHOOTING GUIDE
Symptoms
Possible Cause
Solutions
Lamps fail to operate?
•
A replacement lamp is probably
necessary, but
check that
the lamp is correctly
into
its holder.
Disconnect the mains electricity supply before
adjusting or replacing the lamps.
The extractor lamps may become hot; therefore
ensure the bulb has cooled
before
replacing.
•
Power is cut.
Check if there is power. Check the fuses in the
fuse box. If necessary, replace or reset the fuses.
Motor is on but fan
does not seem to be as
•
Clogged
can reduce the
product’s
Check the
grease and charcoal
(if
also ensure any venting is
not obstructed?
Clean the grease
with warm water and mild
detergent, and/or replace any charcoal
The extractor works
normaly but smells
linger?
•
Clogged
can reduce the
product’s
and may
cause unwanted smells.
Clean the grease
with warm water and mild
detergent, and/or replace any charcoal
Product does not
operate?
•
The mains fuse maybe defective
or has tripped
Check fuses in the fuse box. If necessary, replace
or reset them.
•
Product is not connected
properly.
Check all power connections.
•
If you cannot eliminate the problem after following the instructions in this section, consult your depot or the
Authorized Service Agent. Never try to repair a nonfunctional product yourself.
Troubleshooting
Technical Specification
TECHNICAL INFORMATION
Dimensions:
Total Wattage:
116W
Voltage:
220V - 240V 50HZ
Width :
600mm
500mm
150mm
Depth :
Height:
Your Cooker Hood is
with:
Single motor 60W
Push button control
3 Speed extraction
x2 28W E14 lamps
x2 Aluminium grease filters
Optional Extras:
Charcoal
:
HJA2906 (PK2)
Ducting kits :
APL 2805/6
