Exclusive to Howdens Joinery.co
Page _ 12
Replacing the Lamps
The extractor hood is
with
lamps that may need to be replaced periodically.
Lamp replacement is not covered by your guarantee
The lamps on this appliance should only be used during operation of the cooker hood. They should not
be left on permanently and used as a main lighting source. The extractor is for domestic use only.
Remove the grease filters (as described on page 10).
Prior to touching the lamps ensure they are cooled down.
Unscrew the lamp that needs to be replaced and insert a new E14 28W halogen lamp.
IMPORTANT: Defective lamps should be replaced immediately. If the lights still do not work, make sure that
the lamps are fitted properly into their housings and check the fuse before you call for technical assistance.
Refit the grease filters.
IMPORTANT: BEFORE ATTEMPTING TO CHANGE A LAMP, YOU MUST ENSURE THAT YOU HAVE
DISCONNECTED THE EXTRACTOR FROM YOUR MAINS SUPPLY AND THAT THE APPLIANCE IS COLD.
