Lamona LAM1804, Руководство по установке, Страница: 14 / 20

14
www.howdens.com
Installation Instructions
2 Apply the supplied sealing strip
IMPORTANT
• No liquids must penetrate between the edge of the hob and the worktop, or
between the hob and the wall. If this happens the hob electronics could be
damaged.
• If installing the hob into an uneven worktop, e.g. with a ceramic or similar
covering (tiles etc.), the supplied seal should not be used. Instead, the seal
between the hob and worktop should be made with plastic sealing materials
(putty).
• Under no circumstances should the hob be sealed with silicone sealant!
This will make it impossible to remove the appliance at a later date without
causing damage to it.
3 Fit the hob into the worktop
• Route the power cable so that it is not in
contact with parts of the appliance that may
become hot.
• Ensure the cable is not accessible from
within the cabinet or through drawers.
• Test the hob to ensure it works correctly.
Apply the sealing strip around the glass
surface that comes into contact with
the worktop. Ensure there are no gaps.