Using the hob
10
1. Turn on the hob
2. Touch the relevant hotplate selection control to
turn on the desired hotplate. After the hotplate is
selected, decimal point stops flashing on the
related hotplate display and becomes solid.
3. Set the heat level between
1
and
9
or
9
or
1 by touching or keys. and keys
are equipped with a repeat function. If you touch
one of the key longer time, heat level will
continually increased or reduced at every 0,4
seconds. If you begin with key,
1
will appear
on the display. If you begin with key,
A
and
9
will flash on the display with a period of half
seconds. This indicates that Automatic Cooking is
running. At the end of the preset time for
Automatic Cooking by the manufacturer, selected
hotplate stops the Auto-matic Cooking function and
starts operating at the level that had been set
while the Automatic Cooking function was selected
Boost Function
4. To switch your oven to high power position,
increase the level up to
9
with key and then
press key again. Thus, it will switch into the
high power
P (Boost)
position.
If it is flashing;
• Your pan is not suitable for induction cooking.
• There is nothing on the selected hotplate.
• Bottom diameter of the pan is small for the
hotplate.
You can operate both of the hotplates in either
right or left position at the same time
.
Example: If one of the hotplates in the same
direction (right or left) is set to level
P
, then the
system allows you to adjust the other hotplate up
to level 8 without changing the setting of the
first hotplate.
Using the induction hotplates safely
and efficiently
Operating principle: Because of its operating
principle, induction hob directly heats the pan.
Therefore, it has many advantages compared to
other types of hobs. It is more efficient and the
surface of the hob is cooler.The induction hob is
equipped with superior safety systems that will
allow you to use your appliance with maximum
safety.The hob control has a limitation of the
operating time. If one or more hotplates are
inadvertently not switched off , hotplate will be
automatically deactivated after a certain
amount of time
(see Table 1)
.
If a timer was associated with the hotplate, than
a
00
will be displayed on the timer display for
10 second. The limit of the operating time
depends on the temperature setting selected by
the manufacturer.After the hotplate is switched
off automatically as described above it becomes
ready to be operated by the user again.
Maximum operating time is applied also for this
heat setting.
Important:
Your hob contains zones of Ø145,
Ø180, Ø210 and Ø280 which have induction
features. Thanks to the induction feature, each
hotplate auto-matically detects the diameter of
the pan put on it.
Energy is created only at places
where the bottom of the pan touches” and thus,
energy is consumed at the minimum level.
Table 1:
Preset operating times when you forget
to turn off the hob
Temperature Level
0
0 hour
6 hour
6 hour
5 hour
5 hour
4 hour
1.5 hour
1.5 hour
1.5 hour
0.5 hour
10 Minutes (*)
*The hob will drop to level 9 after 10 minutes
1
2
3
4
5
6
7
8
9
P (Booster)
Operation Time Limit
LAMONA
Appliances
*
Symbol will display if no pan is present
on the selected zone or if there is an issue with
the pan material / size.
