08_
LAMONA
Appliances
Controls Layout
Turning on the hob
Using the hob
Do not use the ceramic hob if the glass surface is cracked, as electrical parts are directly beneath.
Switch off the appliance at the supply to prevent electric shock and contact your supplier.
The appliance is not intended to be operated by means of an external timer or separate control system.
The hob surface remains hot after use.
DO NOT TOUCH.
During the initial start up of the hob (or power
failures) will be displayed for several seconds
and an audible alarm will sound.
This device is controlled with touch control panel.
Each operation you make on your touch control
panel will be confirmed by an audible signal.
Always keep the control panels clean and dry.
Humidity and dirt can cause problems in the
function.
1.
When the hob is first powered on the symbol
will appear on all zone diplays, and an audible
alarm will sound.
2.
After a few seconds the symbol will disappear
and
“0”
appears on the front display,
“1”
appears
on the rear zone display.
3.
After a few seconds all symbols will disappear
on the zone display and an audible alarm will
sound and return to standby mode.
1.
On the control panel touch the key on the
cooking zone you want to switch on.
appears on the cooking display. Cooking zone
is ready for use.
The hob will automatically return to standby mode
if no operation is performed within 10 seconds.
Cooking zone front
Cooking zone rear
Cooking zone displays
(temperature settings 0-9)
Timer display (there are 4 LEDS
for 4 cooking zones)
Enable / disable timer
Temperature increasing /
decreasing
Keylock symbol
On/0ff (Left key for front zone,
right key for the rear zone)
Using the hob
