17
Instructions and Installation
7. Installation
General information
•
Installation should only be
carried out by a registered
competent person.
•
Installations MUST be carried
out in line with the National
Regulations applicable with
this product type.
•
Please note:
Although every care has been
taken to ensure this appliance
has no burrs, or sharp edges,
We recommend that you wear
protective gloves when installing
and moving this appliance. This
will prevent injury.
The hob should not be fitted
above a washing machine, a
fridge or a freezer. Wall surfaces
above the work surface and in the
immediate vicinity of the cooking
hob must be heat resistant.
•
Prior to installation, visually
check the product for any
damage/defects. Do not install
if any issues are found.
• Damaged products may cause
risks to your own safety.
• The appliance is intended for
installation in Howden kitchen
cabinets.
• Surfaces, synthetic laminates
and adhesives used must be
heat resistant.
• Kitchen cabinets must be set
level and fixed.
• If there is a drawer beneath the
oven, a shelf must be installed
between oven and drawer.
• The following installation
drawings are representational
and may not match exactly
with your appliance.
Positioning
The hob is designed to be built
into a work top as detailed in
the image (overleaf).
Aperture width 560mm (+2) x
depth 490mm (+2).
