Lamona HJA2480, Руководство по установке

Страница: 10 / 28

10
IMPORTANT: IDEALLY YOU SHOULD SWITCH ON
YOUR EXTRACTOR TEN MINUTES BEFORE YOU START
TO COOK, OR AT THE VERY LEAST WHEN YOU BEGIN
COOKING.
YOU SHOULD ALSO RUN YOUR
EXTRACTOR FOR TEN MINUTES AFTER YOU HAVE
FINISHED COOKING.
Cleaning your extractor
IMPORTANT: BEFORE CLEANING, ALWAYS
ENSURE THAT YOU HAVE SWITCHED YOUR
EXTRACTOR OFF AT THE OMNI-POLAR SWITCH,
SET AT THE WALL FROM THE CABLE.
Cleaning
o
Clean the external parts of your extractor with mild liquid
detergent and a new damp cloth.
o
Never use abrasives, corrosive solvents or brushes.
o
Never insert pointed objects into the motor’s protective grid.
o
Only clean the control panel and grease filter grill with mild liquid
detergents and a new damp cloth.
o
If you are using the appliance in recirculation mode, then be
sure to replace the carbon filters at the recommended intervals
(see section on “Fitting the carbon filter”). A build up of grease
could cause a fire hazard.
o
Never attempt to clean the area above the grease filters.
The Grease Filters
o
Your extractor is fitted with grease filters, which help to absorb
grease particles and protect your kitchen and furniture from
greasy residues.
o
These metallic filters may become inflammable if you allow them
to get saturated with this greasy residue.
o
To prevent this fire hazard, the filters should be cleaned
regularly. Depending on use, this should be done every 10-15
days or at least once a month, using hot water and normal
washing-up detergent.
o
DO NOT WASH THE GREASE FILTERS IN A DISHWASHER.