manualshive.com logo in svg

Lami Corporation Rose-63CL, Инструкция по эксплуатации

Поделиться
Скачать
Lami Corporation Rose-63CL Скачать руководство пользователя страница 8

7

※If displayed password requirement, press the set button.
　This mode is used for maintenance.

①Cold LED
　LED is lit up during cold laminating

②Heater LED
　LED is lit up during heater is ON

③Prepare LED
　LED is lit up when heater temperature reaches set temperature

④LCD Display Panel

（Displayed when heater switch is ON）

　Left:set temperature Right:present temperature

⑤Set Button
　For setting of heater temperature

⑥Up Button (Temperature)

⑦Down Button (Temperature) 

⑧Enable/disable switch for foot switch
　Continue:Foot switch operation is disable
  Inching:Foot switch operation is enable and roller works during pressing it.

⑨Forward/Reverse Switch
　You can change the direction of roller rotation

⑩Heater Switch
　When this switch is ON, heater temperature rise to set temperature.
　When not using heater, please turn this switch OFF.

⑪Speed Control Dial
　Turning this dial to the right direction increase rotation speed.

Operation panel

①Stand

②Film shaft for under-film

③Signboard

④Emergency stop button

⑤Laminate roll

⑥Film shaft for release paper

⑦Laminate film shaft

⑧Brake

⑨Operation panel

⑩Roller UP-DOWN lever

Main Body of ROSE-63CL

Name of Each Part 

Содержание Rose-63CL















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды