Lami Corporation Rose-63CL, Инструкция по эксплуатации

Страница: 7 / 14

6
Attach to the left side of the body. Attach to the right side of the body.
Attach the underfilm shaft unit in the front part of the machine.
Each shaft holder has different shape. Attach them to the machine correctly,
and attach the shaft correctly.Scale of the shaft is in the front part.
Underfilm Shaft Installation Method
There is an insertion hole of foot switch at the rear part of the
machine. If cap is attached, remove it and insert foot switch plug
carefully. Be sure to take care of convex part. Convex surface
prevents from insertion in incorrect direction. Check the shape
of the insertion hole before inserting. It may cause failure
to insert the plug in an incorrect direction
When not using foot switch, you can disconnect the cable
by pulling the lock.
Foot Switch Installation Method
Stand is assembly type.
①
Be dented area of the stands forward inside,and attach the center pillar.
②
Attach casters with brake to the front part of the stand.
③
attach casters without brake to the rear part of the stand.
②
②
③
③
①
①
Stand Assembly Method
Installation of the Machine