lamber GS6-ek, Инструкция по эксплуатации

Страница: 26 / 61

ENGLISH
First Section - FOR THE USER
WORKING AND USE
The dishwashing machine GS6-ek can wash up to 30-20-15 baskets every hour.
The machine protection degree is IP21, therefore it should not be washed with direct high pressure jet water;
The objects to be washed should be correctly arranged for a good washing-up result;
We suggest to descale dishes, from time to time, in order to remove calcareous and/or starchy sediments
by soaking it in suitable solutions suggested by your cleansing agent supplier.
If you need to buy new dishes remember the following: Dishes and cups: preference must be given to
china or non-porous pottery articles, with smooth surface. Glasses: choose a glass suitable to be washed
in dish-washing machines. Surfaces must be smooth and bottoms the least concave possible.
OPERATION BEFORE WORKING
B
EFORE STARTING THE WORKING OPERATION BE
SURE THAT
:
- the cock is open;
- the filter is in your housings;
- the wash arm and the rinse arm are free to
pivot;
- control the wash-detergent and the rinse-
detergent are in their containers.
CAUTION : Observe the safety notes and
dosage data for the use of chemicals. During
the use of the chemical substance wear
protective clothing, gloves and protective
glasses. Do not mix different cleaning
products.
T
HEN PROCEED
:
A
- With closed door turn the machine on by wall
switch and push the switch “A” situated in Dis.1.
The control lampe “2” will flash ant the tank fills
up.
When the tank is full the control lamp for cycle “2”
stop flashing and lights up.
B
- Place the dishes in the basket minding to
previously remove all solid waste and fat.
Do not overload baskets, dishes must not be
placed one upon the other, water must have the
way to run on each part of the same.
C
– Open the door and introduce the basket in
the dishwasher.
The control lamp “ E ” will flash in case the door of
the dishwasher is open.
Before you start the cycle be sure that the control
lamp “
D ” is flashing. This means that the water for
the washing cycle and the rinsing water
temperature reached the ideal temperature for
working.
Please pay attention to the opening and
closing of the door of the Dish/Glass-washers. Do not
use the machine if you are wearing clothes/items that
could get entangles in the dishwasher parts. As they
can limit personnel’s regular moving ability!
D
– Close the door and choose the washing
period cycle and push the button “ B ” between the
following items:
- lamp 1 flashing – short cycle of 2 minutes
- lamp 2 flashing – medium cycle 3 minutes
- lamps 1 and 2 lightening at the same time
long cycle of 4 minutes.
The washing period cycle has to be chosen
regarding the dirt that has to be removed.
E –
Push the button cycle “ C ”
The cycle include 4 phases:
1 - pre-washing with cold water;
2 - washing with hot water (55÷60 °C);
3 - tank drain and a five seconds stop;
4 - rinsing with clean water at 85÷90 °C.
The control cycle lamp is flashing up to the end of
the complete washing period. Finished the
washing period the control lamps will stop
lightening.
F-
The lighting of the control lamp “D” means
that the water reached the needed temperature
of 85° to 90°C.
The
rinsing will start working of by the reached
temperature need. That means the period of the
washing cycle you chosed will be extended up to