Lambda Labs TX-1A, Руководство пользователя

Страница: 10 / 25

Lambda Labs - Professional Acoustics TX-1A Manual
2.2. General Components
2.2 Figure 1: TX-1A Front Side
www.lambda-labs.com ! 9
a)
a)
b)
c)
d)
d)
PART DESCRIPTION of 2.2 Figure 1 REFERENCE
a)
„EPS“ (Express Pin System) Rigging Points
The TX-1A is equipped with 3 EPS Rigging Points to fly the loudspeaker with
various rigging equipment. Therefore, the loudspeaker can be flown vertically,
horizontally and upside down. The second EPS mounting point on the other side
of the loudspeaker is not shown in this figure. Refer to Chapter 2.2.4 as well.
Chapter
2.2.4
b) Handle
A recessed handle is located on the top plate of the cabinet to carry and move
the loudspeaker.
_
c)
Front Cover
The drivers are protected by a perforated steel grill. Additionally, a weather
resistant fabric on the grill protects the drivers from dust and rain. The fabric is
acoustically transparent.
_
d) Finger Handle
An additional finger handle, located on the top and the bottom of the backside of
the loudspeaker enclose, can be used to uplift, move and carry the loudspeaker
as well.
_