Lambda Labs - Professional Acoustics TX-1A Manual
3. Connect the 10mm Eye Bolt with the 8mm
Rapid Chain Link and the 6mm Safety Rope.
The figure on the left shows the complete
configuration of the Second Independent
Safety Link using the example of a TX-2A
enclosure rigged with a Half-Bracket.
2.2.4.
EPS
&
Rigging
options
overview
The TX-1A is equipped with 3 EPS mounting points to fly the loudspeaker with various rigging equipment. Therefore, the
loudspeaker can be flown vertically, horizontally and upside down. For further instructions and detailed rigging explanations,
please check the provided specific rigging manuals. The following chapters provide an overview of the rigging possibilities you
have with the TX-1A.
2.2.4.1.
EPS
&
Rigging
options:
T-Bracket
Rigging
System
The
rigging
component
T-Bracket
can
be
used
for
all
speakers
from
the
TX-
and
CX-Series.
It
can
be
combined
with
the
Cluster
Bracket
to
set
up
a
cluster
compound
and/or
with
the
Vari-Clamp
providing
both
vertical
and
horizontal
rigging
options.
The
T-Bracket
is
preassembled
and
available
in
2
versions
of
the
EPS
System:
M
(Mobile)
and
I
(Installation)
version.
The
installation
version
provides
additional
tamper-proof
properties
to
protect
the
components
from
unauthorized
access.
!
19
Size: 58 x 34 mm
WLL: 560kg
SF 1:5
DIN EN sim. 56926
8mm
Rapid
Chain
Link
Length: 1 m
max. 35kg
6mm
Safety
Rope
Danger:
The Safety Rope must be tightened in a way that the height of fall of the object to be
secured is minimized! A height of fall of
max.
0.2
m
should not be exceeded under any
circumstances! Check the rigging items involved regularly!
R
DANGER!
Note:
The
mentioned
optional
rigging
items
described
above
can
be
purchased
as
a
complete
set
(Loudspeaker Safety Set).
R
T-Bracket (M)
T-Bracket (I)
Note:
The maximum possible
tilt angle for the TX-1A
loudspeaker in combination
with the T-Bracket is
40,2
°
(vertical loudspeaker position).
For further details, refer to the
T-Bracket manual!
R
