P
AGE
10
A
SSEMBLY
I
NSTRUCTION
A
SSEMBLY
STAGE
#6
Attach Computer Console & Bottle Cage to the Handlebar Mast.
Assembly Hardware Required:
(*Hardware
preinstalled)
#33
Truss Screw*
Qty. 4
#34
Truss Screw*
Qty. 2
Assembly Description:
A)
Remove the preinstalled mounting hardware (Truss Screws #33) from the back of the computer
.
B) Plug the connector of
Upper Data Cable Assembly
(#20) into the receptacle on the back of the
computer. Note: Do not pull on (stretch) the cable assemblies in order to make connections.
C) Connect the
plug end of the
Upper
Heart Rate Cable
(#18) to the receptacle end of the of the Heart
Rate Cable coming from the back of the computer.
D) Tuck excess cable lengths down into the Handlebar Mast. Place the
Computer Console
(#17)
on top of
the mounting plate. Secure the
Computer Console
(#17) to the
Handlebar Mast
mounting plate with
the 4-(previously installed)
Truss Screws
(#33). Note: Actual mounting of the computer may only
require 2-screws, depending on the mounting plate hole alignment.
E) Attach the
Bottle Cage
(#35) to the Handlebar Mast using 2-previously installed
Truss Screws
(#34)
and insert Sports Bottle.
♦
Assembly Stage #6 complete
Heart Rate Cable
Upper Data Cable Assembly
Back of Computer
USE TOOL
34
17
33
20
18
36
35
