A
SSEMBLY
I
NSTRUCTION
A
SSEMBLY
STAGE
#5
Attach Handlebar & Handlebar Mast to the Main Base
Assembly Hardware Required:
(*Hardware
preinstalled)
#31
Truss Head Hex Socket Screw*
Qty. 8
#32
Curved Washer*
Qty. 4
#25
Flat
Washer
Qty.
4
Assembly Description:
A) Remove the preinstalled hardware from the mast mounting area of the Main Base.
B)
Slide the
Mast Cover
(#16) over the lower end of the
Handlebar Mast
(#14). Note: It may be necessary
to remove the (Bottle Cage) mounting screws (#34) in order to slide the Cover up the mast.
Assembly Tip: Temporarily tape the Cover up out the way until the mast mounting hardware is installed.
C)
Connect the
Upper Heart Rate Cable
(#18) to the
Lower
Heart Rate Cable
(#19). (
Figure #4
)
D)
Connect the
Upper
Data Cable Assembly
(#20) to the
Lower Data Cable Assembly
(#21). (
Figure #5
)
Tuck excess cable lengths into frame tubing and slide the
Handlebar Mast
(#14) down on to the
Main
Base
(#1).
E)
Align the mounting holes and secure the mast in place by using the previously installed 4-
Truss Head
Screws
(#31) and 4-
Curved Washers
(#32). Once assembly is completed, slide the Mast Cover (#16)
down over the hardware mounting area.
F)
Mount the
H-Shaped Handlebar
(#15) to the upper-front plate of the
Handlebar Mast
(#14) using
4-
Truss Head Socket Screws
(#31) and 4-
Flat Washers
(#25). (Reference
Step #13
on hardware pack)
♦
Assembly Stage #5 completed
18
19
21
20
16
14
15
31
32
1
34
31
32
Remove: Bottle Cage Mounting Screws
USE TOOLS
Figure #4
Figure #5
P
AGE
9
