Lakeland Davina, Буклет

Страница: 15 / 20

15
TROUBLESHOOTING
The following are some common problems that can occur when using the
Davina Personal Blender on the Move. Please review the problems, their
possible cause and any corrective action that should be taken.
PROBLEM POSSIBLE CAUSE SOLUTION
Some of my drink has
leaked out from the cup
during blending.
The blade is not screwed
onto the cup or the base
properly, or there are too
mainy ingredients in the
bottle.
Switch off the power. Take the
cup and blade off the base and
check they are screwed together.
Check the cup and blade are
locked into the ‘CLOSE’ position
on the base. Check the cup is not
filled beyond the 600ml / 20oz
mark.
The Davina Personal
Blender is not starting.
The power is not on at the
socket, or the cup is not
locked onto base.
Check the power is switched on
at the socket. Check the cup and
blade are locked into the ‘CLOSE’
position on the base.
The ingredients are not
blending properly.
There may not be enough
liquid in the recipe, or hard
fruit and vegetables may need
to be cut into smaller pieces.
Check the recipe has at least 50%
liquid ingredients. Remove any
large pieces of fruit or veg from
the cup and cut them into smaller
pieces. Shake the cup between
blending cycles.
The motor has stalled. The cup is too full.
Turn off the blender, unplug and
allow to cool for at least 15
minutes. Check the cup is not
filled beyond the 600ml / 20oz
mark. Remove surplus ingredients
from the cup and reblend.
The motor is
overheating.
The motor has been on for
too long.
Blend for 30 seconds, allow to
rest for 1 minute until blending
again. You can blend like this for
5 cycles, then allow the motor to
cool for at least 15 minutes.