13
STEAM IRONING
• The default setting is the ‘eco’ steam rate when the appliance is turned on.
• You can change the desired steam rate for each garment according to your
requirements. There are two modes ‘MAX’ and ‘eco’ steam rates available.
• To ensure good steam output, always make sure the water tank is at least a quarter
full.
• When the indicator of selected steam rate is fully illuminated, it indicates that the iron
is ready for ironing garment with steam. The ‘MAX’ steam rate illuminates blue and
the ‘eco’ steam rate illuminated green.
• Remove the iron from the base unit, press the steam trigger with a little force, steam
will be generated and sprayed from the soleplate continuously, then you can iron the
garment with steam.
CAUTIONS:
•
DO NOT
touch hot soleplate at any time before cooling down!
• Never direct the steam at people.
•
DO NOT
activate the steam function when the iron is placed on the unit base to avoid
being scalded by steam.
• After ironing, switch off the appliance, turn off at the wall socket and unplug, the
soleplate is still hot, never touch it with your hand, place it on the thermal insulation
stand until it cools down completely.
STEAM TRIGGER
• When the appliance is heated to the selected
temperature and the indicator of selected steam rate
light is solid, the steam trigger is ready to use.
• For steam ironing, remove the iron from the base unit,
press the steam trigger with a little force, steam will be
generated and sprayed from the soleplate continuously,
then you can iron the garment with steam.
• For drying ironing, lift the iron and iron normally,
DO NOT
press the steam trigger on the handle.
STEAM TOGGLE BUTTON
• The appliance can switch between ‘MAX’ and ‘eco’ steam rates by pressing the steam
toggle button.
• The default setting is the ‘eco’ steam rate when the appliance is turned on.
• Press steam toggle button to select your desired steam rate.
