ELECTRICAL CONNECTIONS
THIS APPLIANCE MUST BE EARTHED
This appliance is fitted with a fused three-pin plug to BS1363 which is suitable for use in all homes
fitted with sockets to current specifications. If the fitted plug is not suitable for your socket
outlets, it should be cut off and carefully disposed of. To avoid an electric shock, do not insert the
discarded plug into a socket.
Fitting a new plug
If for any reason you need to fit a new plug, the flexible mains lead must be connected as shown
here. The wires in the mains lead fitted to this appliance are coloured in accordance with the
following code:
Connect BLUE to Neutral (N)
Connect GREEN & YELLOW to Earth (E)
Connect BROWN to Live (L)
13 amp fuse to be used
If the colours of the wires in the mains lead of this appliance do not correspond with the coloured
markings identifying the terminals in your plug, proceed as follows. The wire which is coloured
green and yellow MUST be connected to the terminal which is marked with the letter E (Earth) or
coloured green. The wire which is coloured blue MUST be connected to the terminal which is
marked with the letter N (Neutral) or coloured black. The wire which is coloured brown MUST be
connected to the terminal which is marked with the letter L (Live) or coloured red.
Before refitting the plug cover, check that there are no cut or stray strands of wire inside the plug.
Use a 13 amp BS1362 fuse. Only BSI or ASTA approved fuses should be used. If you are at all unsure
which plug or fuse to use, always refer to a qualified electrician.
Note: after replacing or changing a fuse on a moulded plug which has a fuse cover, the cover must
be refitted to the plug; the appliance must not be used without a fuse cover. If lost, replacement
fuse covers can be obtained from an electrical shop. This appliance complies with the following
EEC Directives: 73/23 EEC (Low Voltage Directive) and 89/336 EEC (EMC Directive).
CARE AND CLEANING
Always unplug the blender before cleaning. Wipe the power handle and chopping bowl
lid with a damp cloth then dry. Do not immerse in water or any liquid.
All other parts can be washed in warm, soapy water. Take care not to touch the sharp
blades. If carrots, etc., have discoloured the chopping bowl, rub with a cloth dipped in
vegetable oil, then wash as normal.
Do not use abrasive cleaners or metal scourers as they will damage the product.
PLEASE NOTE: it is best to rinse the blades straight away after processing very salty
food.
RECYCLING YOUR ELECTRICALS
Along with many other high street retailers, Lakeland has joined a scheme whereby
customers can take their unwanted electricals to recycling points set up around the
country. Visit
www.recycle-more.co.uk
to find your nearest recycling point.
0002
E
Earth(green/yellow)
L
N
Neutral(blue)
1
3
a
m
p
F
U
S
E
13amp fuse
Live(brown)
Stick Blender Set 16144 IB 01_12:Layout 1 17/1/12 11:35 Page 11
