Laizhou Huibang Machinery MS36127A3, Руководство по эксплуатации для владельца

Страница: 8 / 15

Fig4 Fig5
2. Fig. 5, illustrates the gas spring (B) assembled to the machine. The gas spring (B) keeps the head in the up position.
TABLE
1. Assemble the table (A) Fig. 6, to the base using the two M6x1x35mm flat head screws (B)
Insert the two screws (B) into the two holes (D) in table (A). Place the two T-nuts (C) into the slots (E) provided in the
bottom of the base and tighten the two screws (B) into the two T-nuts (C) securely.
2. The table (A) Fig. 6, can be moved in or out by loosening the two screws (B), and re-positioning the table, and then
tightening screws (B).
Fig6 Fig7
FENCE AND HOLDDOWN
1. Locate handle assembly and remove screw (A) Fig.7, and spring (B) from handle (C). Sperate handle (C) from stud
(D).
5. Insert bar of fence assembly Fig. 7, Tighten handle (A) against flat on fence bar to hold fence in position. NOTE:
Handle (A) is spring-loaded and can be repositioned on the stud located underneath the handle by pulling out the handle
and repositioning it on the stud.