Laizhou Huibang Machinery MS36127A3, Руководство по эксплуатации для владельца

Страница: 7 / 15

Drill Chuck Capacity
1/16
” –
1/2
” （
1-13mm
）
Bushing size
3/4”
（
19.05mm
）
Table size
6
”
x 13 1/4
” （
340x150mm
）
Weight
60 lbs.
（
27kg
）
ASSEMBLY
WARNING: FOR YOUR OWN SAFETY, DO NOT CONNECT THE MACHINE TO THE POWER SOURCE UNTIL THE
MACHINE IS COMPLETELY ASSEMBLED AND YOU READ AND UNDERSTAND THE ENTIRE INSTRUCTION
MANUAL.
RAISING AND LOWERING
HANDLE
1. Assemble hub of handle assembly (A) Fig. 2, to end of pinion shaft (B) and fasten handle to pinion shaft
using special screw (C) and spring (D).
Fig 2 Fig 3
2. Raise mortising machine head (E) Fig. 3, to the up position by turning handle (A) clockwise. NOTE: Handle (A) is
spring-loaded and can be repositioned by pulling out handle and repositioning it on pinion shaft (B).
GAS SPRING
1. Make sure head (A) Fig.4, is held in the up position and assemble the gas spring (B) to the two fittings (C), one located
on the column and the other on the back of the head.