https://www.lairdconnect.com/iot-devices/iot-sensors
6
© Copyright 2019 Laird. All Rights Reserved
Americas: +1-800-492-2320
Europe: +44-1628-858-940
Hong Kong: +852 2923 0610
To log into the gateway web interface, follow the steps from the
RG1xx User Guide
’s Log into the Gateway
section. This guide
is accessible from the website’s
on the Documentation tab.
Figure 4: Gateway interface login screen
Note
:
For this guide, we assume the LAN or Wi-Fi connection is successfully set up and the user login credentials are
updated. We recommend that you update the credentials as soon as possible to minimize a potential security risk.
Update these credentials on the Settings page.
Update the firmware by clicking
Settings
>
Update Firmware
Figure 5: Updating gateway firmware
Depending on the current version of firmware loaded, different URL should be used. If v93.7.2.10 is loaded, use
https://connectivity-firmware.s3.amazonaws.com/rg1xx-lora-gateway/firmware/newest/fw.txt
. For firmware v93.7.3.x and later,
the URL should be auto populated.
Note:
It is recommended to have GA4 (v93.7.3.x) firmware or greater.
Once the gateway is finished updating the firmware, follow the on-screen instructions to reboot the device. This requires a
login using your updated profile credentials.
Содержание Sentrius RG1 Series
Страница 1: ...A Version 1 2...