8
Save to FLASH
Save all parameters currently in RAM to FLASH memory.
Read from FLASH
Read all parameters from FLASH to regulator memory.
Set FLASH to Default
Revert all parameters in FLASH memory to default settings.
Reboot Regulator
Reboot the regulator. Use to test loading of parameters from FLASH to
memory.
3.3 Setup Menu
Global set up is used to change the recording data rate speed and
format settings on the graph. The global values are stored in the
computer’s registry file.
Serial Port
Select the serial port which the PR-59 is connected to and baud rate.
For the moment, only 115200 baud is supported.
Log File
Choose sample rate for the log file and maximum number of samples to
be stored in one log file.
Celsius and Fahrenheit
Default temperature units are in Celsius, click on Fahrenheit to convert
units into English.
Runtime Data
This is the transfer mode between the interface and control board. Runtime data should be IEEE754
type at all times. Only change this if you are advised by Laird Thermal Systems
Runtime Graph
Runtime graph can sometimes be difficult to see especially when multiple parameters are highlighted.
Adjustments can be made to color and line thickness to more easily define each parameter.
Pen
Width
Set the number of pixels width used when drawing the graph on the screen. Default value is 1. Higher
value results in thicker line. Double click on each parameter to change color so graphs are more
easily differentiated from one another.
Set Default Color
If you need to get back to the default settings of the graph drawing colors and pen width, press this
button.
Graph Color
Background and grid color can also be changed by double clicking on each parameter to change
color.
•
Background - to set the color on the graph view background
•
Grid - to set the color on the grid
•
Main, T1, T2, etc. - all graph colors
