Laird Command Pro SAFE-T-RANGE, Руководство пользователя

Страница: 18 / 45

Command Pro Engineered Systems
User Manual
18 142134
1. Disconnect the ‘hot’ input wire X1 from the pendant and connect it to the (X1) terminal 11 of
connector TB1 on the receiver board (A).
2. If you also need 21R14A receiver installation pendant control, connect a wire from the top right lug
on the RADIO/PENDANT transfer switch to the X1 input for the pendant (B).
3. Install a wire (16 gauge) from the ‘X2’ terminal 12 (X2) of connector TB1 to the ‘neutral’ wire from
the Crane Control Power source (C).
4. Install a wire (16 gauge) from the ‘MLC’ terminal 1 (MLC) of connector TB1 to the main line contactor.
This wire will provide a continuous voltage to the ML Coil when the radio is on (D).
Review the steps above to ensure the accuracy of the wiring before applying power to the installation.
Perform 21R14A Installation Testing .