Lainox Compact Sapiens, Руководство пользователя

Страница: 69 / 78

69
24 • SELF-DIAGNOSIS AND ERRORS GUIDE
24.1 • When the oven is turned by pressing knob
16 for 3 seconds, an electronic check of the
main functions will automatically be performed
by the device. Once the self-diagnosis has
been performed, if the oven proves to be in
perfect operating conditions, the cooking
chamber temperature display will show the real
temperature of the chamber and the cooking
mode Leds will flash. Cooking parameters can
therefore be set.
24.2 • If on the other hand the oven detects errors,
these will be shown on display
15 . The
visualisation of errors is very important in
the event technical support is required, as
this value provides information about the
type of error. The message on the display is
accompanied by an acoustic signal that lasts
for 5 seconds, which is repeated every minute
until the oven is turned off.
A10
Fault in cooking chamber temperature probe ,
immediately turn off the oven and call the technical
support service.
A11
Fault in boiler preheating probe , the oven can only work
in convection model, Steam and Combi modes cannot be
activated . Call the technical support service.
A12
Fault in vapour condensation temperature probe . The
vapour condensation is working continuously, the oven
however, can work under
strict observation (greater water
consumption), until the technical support service is called
out
A13
Fault in core probe. If this error message appears, you
should check that the connector is properly inserted in the
slot (
A1 ). In this case, the oven may still be used in timed
mode until the technical support service intervenes, but
without using this accessory.
A04
This means that no water is reaching the oven ; it is
therefore necessary to check that the tap is open and that
there is water in the network. If the lack of water depends
on the network, inform the supplying entity. If on the
other hand there is water in the network, call the technical
support service. In the meantime, the oven can be used in
convection mode.
A11
Intervention by motor's thermal protective device.
Immediately turn off the oven and call the technical support
service.
A02
Intervention by the cooking chamber safety thermostat.
Immediately turn off the oven and call the technical support
service.
A03
Intervention by the boiler safety thermostat, immediately turn
off the oven and call the technical support service.
A07
There is overheating in the electrical components
compartment. The oven can still be used under careful
observation until the technical support service intervenes.
MESSAGES
The main error messages are:
90034270rev02