LAI Games VIRTUAL RABBIDS THE BIG RIDE, Руководство оператора

Страница: 63 / 115

63
•
ACM-II Actuator Control Module
This mounts below the seats and powers the actuators.
Ensure connections are as shown in the photo below:
o
MASTER IN: It joins to the KCU-1P by cat5 cable to the joiner in the front base of the
tower.
o
MASTER OUT – END: join these together with short cat5 patch cable.
o
TO SLAVE: no connection.
ACM-II LED Status:
•
Off: N.D.
•
Green: No fault.
•
Flashing green & flashing orange/red (MASTER): Fault on one of the ACM-II
•
Red: Actuator fault, required manual re-initialisation.
•
Orange: Actuator fault, the unit will reinitialize by itself after a few minutes.
If the cabinet is configured for 240VAC mains input, then an additional power supply is installed
below the seats.
FUSES
6 panel mount fuses are located on the PCB assembly panel.
Value: 5A Fast Blow, 3AG size
Refer to the stickers placed near the fuses.