LAI Games VIRTUAL RABBIDS THE BIG RIDE, Руководство оператора

Страница: 54 / 115

54
11. Set the HDMI switch to PC2 and plug the keyboard dongle into PC2.
12. Plug the USB into PC2.
13. Hold down the power button on the front of PC2 until it powers off.
14. Press the power button on the front of PC2 to turn it on again.
15. A black box on screen will display the progress of the update. This process will take around
20 minutes. The percentage at the bottom of the box will show progress to 100%.
16. Once the process is finished, the last line of text in the black box will instruct you to remove
the USB.
17. Remove the USB, and the PC will automatically reboot.
18. If you have performed a system image, you will need to calibrate the headsets. Please refer
to page 29 of this manual for instructions on calibrating the headset.
19. Once calibration is complete, wait for the Virtual Rabbids software to start up, and you will
be presented with the linking configuration page. On PC2, ensure PC2 is set to YES (setting
can be toggled by clicking it using the trackpad on the keyboard), as shown below, then click
confirm. The software will reboot.
20. Set the HDMI switch back to PC1.
21. Your game has been successfully updated.
NOTE
:
During normal operation, the HDMI switch should always be set to PC1
.