LAI Games VIRTUAL RABBIDS THE BIG RIDE, Руководство оператора

Страница: 45 / 115

45
LOOSEN CONNECTION TO TOWER
Loosen the bolts connecting the yellow cable trunking to the tower (as shown below), so the
trunking is floating. This drastically reduces the vibration passed to the base station housed in the
tower.
If the above steps did not resolve the issue, further troubleshooting instructions can be found under
the section
Troubleshooting > Base Station and Headset Issues .
NO MOTION DURING GAME PLAY
CHECK KCU STATUS LIGHT
The status light on the KCU can help to identify potential issues when there is no motion.
No light = KCU is not receiving power. Ensure the cabinet is turned on, and check all power cable
connections.
Red = Power is present, but there is no USB connection detected. Check that the USB cable is
securely plugged in at both ends, and PC1 has power.
Orange = Power is present, USB connection to PC is present. If there is no motion, there may be a
hardware fault. On start-up, the chairs should automatically move backwards and forwards. If there
is no movement on start-up, this also indicates a hardware fault.
Green = Motion is currently active.
If you suspect a hardware fault, there is further information about the configuration, connections
and components used by the motion base under
Section B: Technical > Motion System .
SAFETY SENSORS
Both the emergency stop button and the safety sensors have the power to stop all motion during
game play. Ensure the area around the safety sensors is clear, and the sensor windows and
reflectors are clean and unobstructed.
Use the input tests in the operator menu to confirm that the stop button and safety sensor inputs
are operating correctly.
Follow the instructions below to calibrate the safety sensors if necessary.