Pag
e
29
PARTS DESCRIPTION
COIN MECHANISMS
The coin mechanisms are located inside the coin door, at the front-right of the machine
cabinet.
CASH BOX
The cash box is located inside the coin door on the front of the machine cabinet.
SPEAKERS
Two speakers are located in the games header and the subwoofer is mounted in a speaker
enclosure in the bottom right hand cabinet box. Access for all speakers is through their rear
service panels.
SERVICE CONTROLS
Are located on the service panel, mounted behind
the coin door.
GREEN SERVICE BUTTON
Use to input credits to the game without activating
the coin counter, and to perform test procedures in
combination with the red test button.
RED TEST BUTTON
Used to enter and access the test modes.
VOLUME KNOB
Use to adjust the speaker’s sound level.
POWER CORD
This is a standard IEC power cord, and is plugged in to the power inlet socket at the rear of
the machine.
POWER INLET
It is a standard IEC inlet socket, located at the rear of the machine, on the right-hand side as
viewed from the rear.
Note:
there is a main power fuse internal in this IEC socket .
MAINS SWITCH
The mains switch is located on the power inlet assembly, along with the mains fuse and IEC
inlet socket.
FUSES- MAIN AC SUPPLY FUSE (1 x 6 AMP FAST BLOW, M205 TYPE)
This fuse is for the main AC supply and is situated in the IEC mains input socket.
PCB’s
For location of all game PCB’s, refer to the parts location diagram.
* WARNING! *
ALWAYS
turn
OFF
mains power and unplug the game before replacing any fuses, and
ALWAYS
use the correct rated fuse.
Содержание Speed Of Light
