LAI Games Speed Of Light, Руководство оператора

Страница: 11 / 43

Pag
e
13
ATTRACT MODE
The Attract mode provides a light and sound display while the game is not being played. This
feature is to attract potential customers to play the game. The attract mode sound can be
turned on and off
PLAY MODE
Speed of Light has two play modes. The standard Coin Play mode, where a coin, or coins are
inserted. Or Free Play mode where no coins are necessary.
COIN PLAY
The Coin Play mode is entered from Attract mode , by inserting coins in any of the two coin
slots on the front of the machine cabinet, then following the instructions in the “How to
Play” section of this manual.
FREE PLAY
Free play can be set in one of three ways:

From attract mode by holding the green service button for longer than five seconds
(this is reset to normal play when the machine is turned off and back on)

Or by setting the P-01 setting to FrEE (this is fixed, and stays set to free until this
setting is changed)

For a single free game, just press the green service button once. When issuing single
free games in this manner, prizes can be won as normal.
ERRORS
Button, ticket and machine errors can be alerted in multiple ways. A voiceover during the
attract mode, a silent red light flashing on the front of the machine, or both. The silent red
button is the default setting. To identify the error in this mode, press the red test button
once. To clear the error, press the red test button once more. The game will check if the
error is fixed. If the reason for the error is gone, the game will continue as normal. If the
error has not been fixed, error will remain on the display.
CODE ERROR DESCRIPTION SOLUTION
Err1
TICKET ERROR - Jammed tickets, no
tickets, or no ticket notch pulse for
longer than 3 seconds
Clear ticket dispenser jam or replenish
tickets.
Err2
GAME MODE BUTTON JAM - active
for longer than 30 seconds
Check button function using switch test
Err3
EEPROM ERROR - Problem with on-
board EEPROM The main MCU is getting errors reading the
EEPROM (24C16 IC on MCU).
Err4
PLAYFIELD BUTTON ERROR - active
for longer than 30 seconds Check button function using switch test
and clear the jam button or faulty switch
Err1 - TICKET ERROR
This error usually occurs if the game has run out of tickets or there is a ticket jam. If the
game was out of tickets, replace them, and the error will automatically clear as well as feed
any outstanding payout. Less common reason is if the game PCB tries to dispense tickets but
does not get a notch pulse for approximately three seconds. Use the switch test function to