LAHTI PRO L1540400, Инструкция по эксплуатации

Страница: 6 / 64

6
the batteries, press and slid out a compartment cover. Remove a battery
and put a new one in. Close the lid. Repeat for the other side.
CAUTION! Replace the batteries only in twos. Do not use a used and new
battery at the same time.
PROTECTION OF THE ENVIRONMENT:
CAUTION! The symbol nearby denotes that old equipment
must never be thrown away together with other waste (with
the penalty of a fine). Hazardous components of electronic
equipment may adversely affect the natural environment and
human health.
Each household may contribute to the recovery and reuse (recycling) of
old machinery and equipment. Both in Poland and Europe a system for
recovery of used equipment either exists or is being created. The system
obliges all organizations that sell such equipment to collect the used
machinery and appliances. Moreover, general purpose collecting points
for such equipment are available.
11. FILTER SYMBOLS:
MODEL: ADF GX-850RM – model of the auto darkening filter;
ANSI GX Z87 W4/5-8/9-13 – American safety standard;
CAN/CSA Z94.3 – Canadian safety standard;
4/5-8/9-13 GX 1/1/1/2/379 CE – marking of a welding filter with
manual setting of protection degree, where:
4 - number of clear state; 5-8 – numbers of light state shades; 9-13 –
numbers of dark state shades; 1 - optical GX – manufacturer's symbol;
class; 1 - diffusion of light class; 1 - variation of luminous transmittance
class; 2 - angle dependency class; 379 - number of European standard for
auto darkening welding filters EN 379, CE - sign of conformity with new
approach Directives.
12. MARKING ON THE MASK:
GX EN 175 F , where:
GX – manufacturer's symbol;
EN 175 – no. of the standard which the conformity assessment was
based on;
F
– symbol of protection from high-speed particles, up to 45 m/s, and
low energy;
ANSI GX Z87 – marking based on U.S. standards;
ANZS 1337 – marking based on Australian standards;
CAN/CSA Z94.3 – marking based on Canadian standards;
IMPORTER / AUTHORIZED REPRESENTATIVE:
Profix Sp. z o.o.,
ul. Marywilska 34,
03-228 Warszawa, Polska
1 3 . WARRANTY:
In order to be provided a warranty service, the user has to return a defective product at the point of sale or to an authorised distributor or reseller of PROFIX
where it was purchased. Learn about the return policy prior to returning a product. Usually, product identification data, including model number and serial
number and a detailed description of the problem are necessary. A receipt that confirms the purchase and the validity of the warranty has to be submitted as
well.
1. The warranty runs for two years following purchase.
2. Any defects found during the warranty period shall be removed free of charge within 14 business days after the product was delivered at seller's address.
The warranty period is extended by the repair time.
3. A warranty card is valid if it contains purchase date, stamp of the point of sale, or a sales receipt.
4. In order for a product to be repaired, it has to be delivered at user's cost to the point of sale. After repair, the product shall be sent to the claimant at
warrantor's cost.
5. The claimant should deliver the helmet appropriately protected against damage for transport.
6 . The claimant shall be liable for the helmet being lost during delivery to the point of sale and the warrantor is obliged to deliver a repaired helmet to the
claimant and shall be liable for it being lost during transport.
7 . During the warranty period, damaged equipment shall be repaired by the warrantor or replaced with new one that is the same and undamaged free of
charge. If it is impossible to repair or replace the device with a new one, the claimant may have the amount paid returned or select a different device with
similar specification and features. Any financial discrepancies shall be compensated by the warrantor or the claimant depending on the price of the
selected device.
8 . This warranty covers defects that occurred during appropriate use or were caused by factory defects and does not apply to consumables or other
additional equipment.
9 . The warranty does not cover defects that resulted from:
- Repairs, modifications, or changes in the structure made by the user or other unauthorised persons.
- Mechanical, thermal, chemical damage or deliberate damage.
- Helmet storage and maintenance and other damage attributable to the user.
- Decreased product quality that results from wear and tear, e.g. abrasion of the external coating, scratches, broken glass, etc.
- Damage caused by improper and unintended use.
The warrantor may refuse to accept a claim if the sales document has a formal defect, such as not filled in warranty card, no purchase receipt, etc.
SERVICE CENTRE ADDRESS:
Profix Sp. z o.o.
ul. Dobra 3
Łomna-Las
05-152 Czosnów
e-mail: tel. 022 785 96 75 serwis@profix.com.pl
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Purchase data and stamp of the seller