laguna SHEARTEC II PX-22, Руководство пользователя

Страница: 37 / 83

Operation 37
Operation
CAUTION! PLACE THE PLANER ON A “ SECURE AND STABLE SURFACE” FOR OPERATION. “CLAMP OR
BOLT” THE PLANER INTO POSITION.
1.) Establish the proper depth of cut (Equal to or less than 1/16”), using either the
DRO (Digital Read Out) or Scale .
2.) Pull out and lock each extension roller to support long stock.
3.) Start Dust Collection Machine.
4.) Start Planer.
C displays the On/Off Switch
5.) Adjust & Set Feed Rate Speed (See Fig. C Below) to desired Speed (10 or 30 FPM), while planer is running.
WARNING! THIS ACTION WILL VOID WARRANTY! IF OPERATOR DOES NOT ADJUST DESIRED SPEED
WHILE PLANER IS RUNNING.
6.) Feed stock into planer, maintain control and support of stock until the stock is securely feeding through planer.
7.) Reposition yourself to the outfeed side of planer and control and support stock until it has exited the outfeed
roller.
Helpful Tips:
• PLANERS WORK BEST IF ONE FACE OF STOCK IS FLAT. IF NOT, FLATTEN WITH A JOINTER OR DRUM
SANDER.
• IF NOT POSSIBLE TO FLATTEN ONE FACE, PROCESS CUPPED MATERIAL WITH THE CUP “UP” SO THE
MATERIAL IS STABLE ON THE PLANER BED.
• IF MATERIAL IS SEVERELY CUPPED, ANOTHER OPTION IS TO RIP THE MATERIAL, PLANE IT AND GLUE IT