laguna Revo 2036, Инструкция по эксплуатации

Страница: 10 / 24

Comparator Brackets (Optional)
See Fig.4, mount the front comparator bracket C to the back of the headstock with two
12mm socket head cap screws. This bracket can be also used for spindle shield guard
mounts.
Rear comparator bracket should be mounted to the back of the tailstock. The bracket has
a slot so it can be aligned with the front comparator bracket. Use two 12mm head cap
screws to secure rear comparator bracket to the tailstock
Spindle Shield (Optional) - Fig. 5
1, Lift up the spring pin B and insert the support rod A into the bracket hole. Release the
spring pin, slide the rod and you will feel the spring pin snap onto position.
2, Install the outer collar C and tighten the set screw D.
Fig. 5 Fig.6
20” Extension Bed (Optional)
An optional 20” extension bed can be mounted on the lathe in three locations:
Fig. 7 Fig.8