laguna Quadtec I PXI12, Руководство пользователя

Страница: 22 / 36

22 PX|12 Quadtec:I Planer \ Operation
2. Establish the proper depth of cut (typically less than 1/16”), using the Thickness Adjustment handle and
referencing the Thickness Scale or the Material Removal Scale.
NOTICE! One revolution of the Thickness Adjustment Handle equals 1/16”, half a turn equals 1/32”, etc.
3. Lock the Carriage Lock after setting the depth of cut!
4. Start dust collection.
5. Start planer.
6. Feed stock into planer, maintain control and support of stock until the stock is securely feeding through
planer.
7. Reposition yourself to the outfeed side of planer and control and support stock until it has exited the
outfeed roller.
Figure 12: Thickness Adjustment Handle
Helpful Tips
• PLANERS WORK BEST IF ONE FACE OF STOCK IS FLAT. IF NOT, FLATTEN WITH A JOINTER OR DRUM SANDER.
• IF NOT POSSIBLE TO FLATTEN ONE FACE, PROCESS CUPPED MATERIAL WITH THE CUP “UP” SO THE MATERIAL IS
STABLE ON THE PLANER BED.
• IF MATERIAL IS SEVERELY CUPPED, ANOTHER OPTION IS TO RIP THE MATERIAL, PLANE IT AND GLUE IT BACK
TOGETHER.
• PLANE WITH THE DIRECTION OF GRAIN TO REDUCE TEAR-OUT AND PROVIDE THE BEST SURFACE FINISH.