laguna P12/5, Руководство пользователя

Страница: 17 / 67

(13) Scoring Blade
Aligning Scoring Blade Set
The scoring blade must be aligned with the main blade to
ensure satisfactory cutting results.
1. Move the blade tilt to 0° (blade 90° to table) and raise
the main blade all the way up.
2. Use T tool to adjust scoring blade (Fig. 36- 1/ -2)
3. Move the rip fence against the main blade (or scoring
blade) (Fig. 37)
4. Use the adjustment controls to move the scoring blade
so that the rip fence can touch both the scoring blade
and the main blade.
5. Lower the scoring blade to the correct height (2mm or
5/64"), perform a test cut, then make any final adjustment.
(14) Fence Scale Alignment
Before operation, the 0" mark on the rip fence scale
must be aligned with the right side of the blade to ensure
that the rip fence measurements will be accurate.
1. Move the blade tilt to 0° (blade 90° to table), and raise the
main blade all the way up.
2. Move the rip fence against the main blade (Fig. 37)
3. Loosen the cap screws securing the fence scale.
4. Slide the fence scale to line up the first mark on the
scale with the left edge of the rip fence and tighten the
cap screw.
5. Set the rip fence at 1/8" , slide the adjustable right against
the rip fence body, and lock the ring in place. This will
prevent the fence from hitting the blade.
(15) Dust Collection
There are dust ports are designed on this machine,
please connect the dust collection system before operations.
Dust Collection Content
Blade guard / Dust hold x 1
Flat washer 8mm x 1
Button head screw M8-1.25 x 40 x 1
Dust collection system x 1
4" Dust hose x 1
4" Hose clamp x 2
2-1/2" Dust hose x 1
2-1/2" Hose clamp x 2
14
Fig.38
Adjustng
scoring
Fig. 36-1
Adjusting
scoring
forwarder/back
Fig. 36-2
Adjusting
scoring rise/fall
All manuals and user guides at all-guides.com