1.5HP Mobile Dust Cyclone Manual
36
Step Forty Two: If you do not want to use a plastic bag inside the octagon
collection drum, you need to block off the negative pressure. There is a little pack
containing the items needed to do this. You will also need take the (4)
1/4”*1/2”
carriage bolts, (4) 1/4”*OD19*2t flat washers and (4) 1/4” hex nuts that were
securing the vacuum suction pipe to assemble the cover plates. The vacuum
suction pipe on the drum will be removed for this. It will not have a purpose if you
block off the negative pressure.
Step Forty Three: Remove the vacuum suction pipe from the drum by loosening
the (4)
1/4”*1/2” carriage bolts, (4) 1/4”*OD19*2t flat washers and (4) 1/4” hex
nuts mentioned in the previous step. There will be 2 sets from the top and 2 sets
from the bottom of the vacuum suction pipe.
Cover plates
Foam tape
Plug
Содержание P Flux 1
