laguna P Flux 1, Руководство пользователя

Страница: 15 / 56

1.5HP Mobile Dust Cyclone Manual
14
UNPACKING
Your 1.5HP Mobile Dust Cyclone comes packed in a single box. Before attempting to
assemble this machine, follow these directions for unpacking:
1. Carefully cut the banding straps and remove them from the box.
2. Cut along the tape line at the top of the box.
3. Remove all parts from the top of the styrofoam and set aside.
4. Remove the styrofoam packing material from the top of the machine.
5. Carefully take out the machine components from the box and set aside.
6. Using the diagr am below ens ure that all parts are present and in good condition.
DESCRIPTION (QUANTITY) Figure 1
A. Motor
B. Switch and remote controller
C. Dust chute
D. Canister shield (front and back)
E. Top upright supports (3)
F. Canister cover plate
G. Base frame
H. HEPA Canister filter
I. Canister shield (side)
J. Octagon drum left panel
K. Octagon drum right panel
L. Octagon drum front panel
M. Octagon drum back panel
N. Octagon drum base panel
Report any missing or damaged parts to your dealer or distributor. Prior to tool
assembly and use, read this manual thoroughly to familiarize yourself with proper
assembly, maintenance and safety procedures.
G
J
K
L
M
N
O
P
Q
R
S
T
U
V
W
V
V1
V2
V3
Hardware
box
Manual
O. Octagon drum lid
P. Octagon drum foot peddle
Q. Canister end cap with 4” port
R. Lower upright supports (3)
S. Vacuum suction ring
T. Upright support reinforcement plate (3)
U. Foot peddle bar (left and right)
V. Foot peddle assembly fittings
V1. Lower triangular support plate (2)
V2. Foot peddle bar support (2)
V3. Lower support plate (2)
W. Inlet adapter
X. Hardware box
Y. Operating and Parts Manual
X
Y
A
B
C
D
E
F
H
I