laguna P Flux 1, Руководство пользователя

Страница: 27 / 56

1.5HP Mobile Dust Cyclone Manual
26
Ste p Twenty Two: Apply foam tape to the cone flange before attaching the drum
lid. Secure the Octagon drum lid to the cyclone funnel using (6) 5/16”*3/4” hex
bolts, (12) 5/16”*OD18*2t flat washers and (6) 5/16” hex nuts. Make sure to first
attach all the bolts on before tightening the bolts. The lid will turn when the bolts
have not been tightened for alignment. Failure to do will result in the drum lid not
being able to align with the drum.
Step Twenty Three: Attach the full drum detection sensor to the opening on the
drum lid located behind the cyclone funnel. When securing the sensor make sure
the end of the sensor is not longer then the drum lid rim. If it extends longer
passed the rim, the detection will not function correctly.
Inner view of
drum lid rim
Bottom end
of sensor
You will find a tag on the cone with
the following warning. Take note
and remove tag when you have
completed this step.