laguna MTSAW17536110-0130, Руководство пользователя

Страница: 19 / 35

18
.
BLADE HEIGHT ADJUSTMENT
The blade height adjustment hand wheel A is
located on the front of the saw and there is a
lock knob B on the hand wheel that allows you
to lock the wheel and secure the blade at the
desired height Fig. 26.
To raise or lower the blade:
1. Loosen the blade height lock knob B by
turning counter clockwise.
2. To raise the blade: turn the hand wheel
clockwise. To lower the blade: turn the
hand wheel counter clockwise.
3. With the blade set to the desired height,
tighten the lock knob by turning clockwise to
lock the blade.
BLADE TILT /BEVEL ADJUSTMENT
The blade tilt (bevel) adjustment hand wheel C
is located on the side of the saw. The bevel
locking lever D is located under the table at the
front of the saw and allows the user to lock the
tilting mechanism and secure the blade at the
desired angle Fig. 27.
To change the angle of the blade:
1.
Loosen the bevel locking handle D by
turning it counter-clockwise.
2. Turn the hand wheel C left or right as
required to set the blade to the desired
angle. The blade can be tilted to the left
anywhere from 0° (90° to the table) to 45°.
3. With the blade tilted to the desired angle,
tighten the bevel locking handle by turning it
clockwise to lock the tilting mechanism and
secure the blade.
WARNING:
TO LIMIT YOUR EXPOSURE TO
THE BLADE AND ALSO TO MAXIMISE THE
EFFECTIVENESS OF THE ANTI-KICKBACK
PAWLS (WHEN USING THE RIVING STYLE
SPLITTER & BLADE GUARD), NEVER HAVE
MORE BLADE HEIGHT THAN IS REQUIRED TO
COMPLETE THE CUT. WHEN SETTING THE
BLADE HEIGHT FOR THROUGH-CUTS (CUTS
ALL THE WAY THROUGH THE THICKNESS OF
A BOARD) SET THE HEIGHT OF THE
BLADE TO ROUGHLY 1/4" HIGHER THAN
THE THICKNESS OF THE BOARD.
3
Fig. 26
Fig. 27
!
！
A
B
C
D