laguna MPLANPX12-0130, Руководство пользователя

Страница: 18 / 36

18 PX|12 Quadtec:I Planer \ Setup Inventory List
Inventory List
The following depicts items shipped with your machine. Before assembling, ensure that you have received
all parts shown below. Machine parts should arrive sealed in plastic bags. Remove parts from plastic bags
before laying them out to inventory them.
REF Description Q Packaging
Dust Chute 1 In Box
Torx Wrench 1 In Box
Height Adjustment Handle 1 In Box
Screw for Handle 1 In Box
Screws for Dust Chute 3 In Box
Tools/items Required: Assembly & Adjustment
·
T-25 Torx wrench (included)
·
T-20 Torx wrench (not included)
·
10mm hex wrench (not included)
DANGER!
FOR YOUR OWN SAFETY, DO NOT CONNECT THE MACHINE TO THE POWER SOURCE UNTIL THE MACHINE IS
COMPLETELY ASSEMBLED! PLEASE ALSO MAKE SURE THAT YOU READ AND UNDERSTAND THE ENTIRE MANUAL.
Assembling
General Setup
1. Install Thickness Adjustment Handle. Place handle on exposed stud, aligning flat of handle with flat of
stud, insert mounting screw and tighten.
The Carriage Lock must be “UP” (unlocked) when turning the Thickness Adjustment Handle
(Fig. 4)!
The Carriage Lock must be locked when operating the planer!