laguna DT-18, Руководство пользователя

Страница: 31 / 57

Mainteance & Troubleshooting 31
Troubleshooting: Cutter
Problem Possible Cause Correction
1) Burning mark on
product Cutter dulled Sharpen it
2) Product surface not
smooth Cutter dulled Sharpen it
3) Cutter rumbling Poor cutter balance Check cutter balance
ORDER REPLACEMENT PARTS:
The replacement parts may be ordered from your local distributor or the machine manufacturer. If the parts you
need are not available
from your local distributor, your order will be faxed to the machine manufacturer for expedited handling.
When ordering the replacement parts, always provides the following information:
-The model number and serial number of the machine.
-The desired parts numbers, see parts lists shown in the manual book.
-The parts name.
-Your desired quantity of the parts.
Dust Hood Outlet Connecting:
There is a dust hood outlet above the cutterhead.
Put the flexible rubber pipe on the dust hood outlet connecting.
DO NOT operate the machine before starting
the dust hood outlet.