laguna CFlux 3 Скачать руководство пользователя страница 12

Страница: 12 / 82

-12-

www.igmtools.com

Pic. 40

Step 37: Attach the canister cover plate to the dust chute using (12) 5

mm*13 sheet metal thread bolts.

Pic. 41

Step 38: From the bottom of the canister filter, push the rotation shaft

through the hole in the middle of the canister cover plate.

Pic. 42

Step 39: While holding the rotation shaft above the hole, insert the

bearing onto the shaft. This will fix the rotation shaft in place and you will

not need to keep holding it up. Secure the bearing using bolts (4) 6 mm*19

mm and washers (4) 6 mm*OD19*2T.

Pic. 43

Step 40: Secure and tighten the (1) 8 mm*19 mm and (1) 8 mm*OD23*2T

flat washer on the rotation shaft base.

Pic. 44

Step 41: Attach and secure the rotation crank to the top of the rotation

shaft using a hex bolt (1) 8 mm*19 mm and a flat washer (1) 8

mm*OD30*3T.

Pic. 45

Step 42: All the assembly steps have been completed.

Pic. 46

6. Maintenance procedures

CLEANING THE FILTER

To ensure proper operation of this Mobile Dust Cyclone, the HEPA

canister filter must have adequate air flow. This means the filter must be

regularly maintained by carefully blowing the filter clean using compressed

air and an air gun to release built-up particulates trapped between the

filter pleats.

For heavy duty users, it is recommended to use compressed air on a

regular basis to maintain maximum filtration efficiency and longer life span

of the filter.

Using the Filter Cleaner Crank

The filter cleaner crank knocks dust particulate and small debris from the

pleated filter and into the filter bag.

3HP Mobile Dust Cyclone Manual

Step Thirty Five: Insert the rotation shaft assembly into the canister filter. Slightly

bend the paddles to get them into the canister filter.

Step Thirty Six: Assemble the canister filter to the dust chute. Tighten the band

clamp and adjust the tightness accordingly to ensure the canister filter is tightly

fitted onto the dust chute.

3HP Mobile Dust Cyclone Manual

Step Thirty Seven: Attach the canister cover plate to the dust chute using (12)

3/16”*1/2” sheet metal thread bolts.

Step Thirty Eight: From the bottom of the canister filter, push the rotation shaft

through the hole in the middle of the canister cover plate.

3HP Mobile Dust Cyclone Manual

Step Thirty Nine: While holding the rotation shaft above the hole, insert the

bearing onto the rotation shaft and pushing it down to the canister cover plate.

This will fix the rotation shaft in place and you will not need to keep holding it up.

Secure the bearing using (4) 1/4”*3/4” hex bolts and (4) 1/4”*OD19*2t flat

washers.

Step Forty: Secure and tighten the (1) 5/16”*3/4” and (1) 5/16”*OD23*2t flat

washer on the rotation shaft base.

Содержание CFlux 3



















































































Результаты поиска

Содержание CFlux 3

Отзывы:

Похожие инструкции для CFlux 3

Бренды по названию

Популярные бренды

laguna CFlux 3, Руководство по эксплуатации

Результаты поиска

Содержание CFlux 3

Отзывы:

Похожие инструкции для CFlux 3

Бренды по названию

Популярные бренды